top of page

Select your Finish

SPS offers a variety of finishes and metal treatments on all of our fabricated products.

Chemical

Mechanical

SPS kettle with jacket. bead blasted finish
2000 Round Mixing Tank (with fixed wheel).png
SPS Vacuum Chamber. mirror brite finish
SPS ASME multiround filter housing. electropolished
PASSIVATION

All SPS fabricated parts/equipment are passivated prior to leaving our facility and are certified to various industry standards: ASTM-A-380, ASTM-A-976, AMS QQ-P-35C, MiL-STD-5002, AMS 2700B. 

 

Passivation is a chemical treatment using either Nitric or Citric acid formulations that remove any "embedded" iron fines or particles placed on the surface by the fabrication process. Unless removed by passivation, these particles disrupt the continuity of naturally occurring oxide formed on the surface of stainless steel and other refractory alloys (Ti, Nb, Zr).  After passivation, the oxide surface layer can reform as a continuous layer based upon the metals's surface roughness and irregularities.

PASSIVATION

ELECTROPOLISHING

ELECTROPOLISHING

(10-15 Ra)

  •  

Provides a finish on the customer's equipment/part that has a "super corrosion resistant," chromium enriched passive surface with an oxide surface layer that is ~3x the thickness of the naturally formed layer produced by passivation alone. Electropolishing is certifed in accordance to ASTM-B-912 and other internal SPS standards.

Benefits of an Electropolished Surface Include:

SPS ASME multiround filter housing. electropolished

Cosmetic Appeal

  •  

A thickened chromium oxide layer for enhanced passivity

  •  

Ultra cleanliness leaving a smooth, "pit-free" surface

  •  

Reduced mechanical stresses in upper metallic surface layers that are areas for subsequent corrosion pit formation

  •  

~3x the passive layer thickness

Super corrosion resistant

Glass bead blasting is the operation of forcibly propelling a stream of glass particles against a surface under high pressure to smooth a rough surface or remove surface contaminants. 

Provides the customer's equipment or part with a smooth, bright surface that's easily cleanable & pit free. Subsequent passivation removes any "embedded particles & fines" as a result of the fabrication process. Without removing the fines from the surface, the naturally occurring oxide layer might not form continuously on the surface thereby reducing the material's corrosion resistance.

 

GLASS-BEAD BLASTED

MIRROR BRITE

GLASS BEAD BLASTED
MIRROR BRITE
SPS kettle with jacket. bead blasted finish

(25-50 Ra)

The passivation process is performed after all bead blasting operations.

bead blasted and passivation finish on tank

Bead blasting creates a uniform cleanable matte texture.

(25 Ra or less)

SPS Vacuum Chamber. mirror brite finish
16 SPS bead blasted tanks

Satin Finishes are 35 Ra (150 Grit) surfaces that have excellent cosmetic appeal but do not show the effects of “staining” or “streaking” that may appear on mirror brite surfaces when they are cleaned with germicidal/sterilizing solutions. 

 

In addition, these finishes maybe be electropolished, if desired, to reduce surface roughness down to 25 Ra or better.

 

SATIN FINISHES

SATIN FINISHES
2000 Round Mixing Tank (with fixed wheel).png

Stainless Process Systems, Inc.

1650 Beacon Place, Oxnard, CA 93033

  • LinkedIn - White Circle

© Stainless Process Systems 2024. All rights reserved. Made in California.

bottom of page